Product quantity cannot be greater than 99
PART # 820473096
Sew-On Button Foot
Specialty type: Garments
Easily stitch on buttons of all sizes
Sewing on buttons can be a tedious job – but not when you use the Sew-on Button Foot!
At A Glance
- Easily sews on buttons of all sizes
- Just set the stitch width to match the spacing between the holes and your machine does all the work
- Include a shaft to sew on buttons with a thread shank
(tap letter to learn more)
*The automatic needle threader cannot be used on Group L machines
1. Mark on the fabric where you want the button to be placed.
2. Snap on the Sew-on Button Foot.
3. Lower feed dogs.
4. Insert the button between the black metal piece and the presser foot. Make sure that two holes are positioned in the cut-out of the presser foot.
5. Place the fabric under the presser foot. Select button sew-on stitch or zigzag stitch. Lower feed dogs.
6. Select width to match buttonholes. Manually turn the hand wheel to make sure that the needle enters the left hole.
7. Start to sew. The machine will automatically tie off your button if using button sew-on stitch. If using zigzag, sew across button five times.
If you want your button to have a shank:
Push the plastic piece on the presser foot towards you, placing it between the two holes of the button. When you have finished sewing your button, pull the plastic piece back, remove your button from the presser foot and cut off the threads. Wrap the seam with sewing thread and make a knot.