You are offline, the product will be added to cart once you are online on product availability
The products are being added to cart which are added while offline
Previous Next
    Available in Stores

    PART # 821140096

    Open Toe Free-Motion Foot

    Specialty type: Quilting

    We’re sorry, this item is out of stock online. Please check with your closest store for availability. Find A Store

    1. Disengage the IDT™ system.

    2. Carefully loosen the small silver screw on the back of the presser foot holder until the crosshole is accessible.

    3. Squeeze the presser foot gently together and guide the pin of the foot into the crosshole of the presser foot holder as far as it will go. Make sure the clear arm is above the needle clamp.

    4. Tighten the silver screw.

    5. Lower the Open Toe Free-motion Foot into the free-motion/darning position by either selecting the free-motion icon on the touch screen of your machine or manually setting the presser foot lifter in the free-motion position.

    6. Lower the feed dogs.

    7. Select a straight stitch or a zigzag stitch.

    8. Keeping an even speed, manually move your fabric.


    Note: Because the feed dogs are lowered, you must move the fabric manually. For even stitches, move your fabric in a smooth, steady motion.