Product quantity cannot be greater than 99
PART # 821420096
Fuse-On Whisper Web Mesh Black Stabilizer 12" x 10 Yards
Specialty type: Embroidery
A semi-sheer textured polyester iron-on cut away stabilizer designed to eliminate the bulk, stiffness and show through
PFAFF® Fusible No-Show Mesh is a semi-sheer textured polyester iron-on cut away stabilizer designed to eliminate the bulk, stiffness and show through of a stay-in stabilizer. It is used as a permanent backing and is ideal for garments and fabrics with stretch as well as applications that will be close to the skin. The translucent nature of this stabilizer eliminates the bulk, stiffness and shadowing characteristic of other types of permanent stabilizers. PFAFF® Fusible “No Show” Mesh stabilizer is applied to the back of your fabric prior to hooping, pre- venting distortion during the hooping process. No messy spray adhesives or glues needed!
Fusible No-Show Mesh is an iron-on support for stretch or slippery-type fabrics for improved stability.
Use on fabrics such as: t-shirt knit, fleece, sweater knit, stretch denim, wool, rayon, silk, polyester knits and satin.
• Cut a piece of Fusible No-Show Mesh large enough to fit in hoop (hoop dimension plus at least 1” on all four sides). The shinier side of No-Show is the fusible side. Position the fusible side on the wrong side of fabric area for embroidery. Fusible No-Show Mesh irons on with the iron set between medium and high. (Use appropriate heat for type of fabric being ironed.) Press to fuse in place. Since this will be peeled back when completed, it does not require a permanent bond.
• Position fabric and stabilizer in hoop. Hoop fabric; tighten without pulling or stretching. If needed, add a second layer of No-Show Mesh or a light tear away for the higher stitch count designs.
• Stitch the embroidery.
• When the embroidery is finished, trim away excess No-Show Mesh, leaving about ¼” on outside edge of embroidery design. Follow fabric recommendations for machine washing, dry cleaning and pressing.