You are offline, the product will be added to cart once you are online on product availability
The products are being added to cart which are added while offline
    Available in Stores

    PART # 820920096

    Three Hole Yarn Foot for IDT™ System

    Specialty type: Garments

    Purchase This Item Through Your Favorite PFAFF® Store


    1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.

    2. Select a 9 mm decorative stitch. Decorative stitches that use forward motion work best (Avoid stitches with too much backward motion.)

    3. Thread the decorative cords or yarn into the holes from the top of the foot, using the Yarn Threader, prior to attaching the foot onto the sewing machine.

    4. Make sure the cords or yarn slide easily through the openings. (If the yarn is too thick it will create too much tension and the feeding might be affected.)

    5. Snap on the Three Hole Yarn Foot.

    6. Engage IDT™ system.

    7. Place the threaded cords or yarn under the presser foot with a 5 cm (2”) tail.

    8. Place a tear away stabilizer underneath the fabric and place your fabric under the presser foot.

    9. Sew carefully, not too fast. If your machine has a speed control reduce the sewing speed to easily guide the fabric and yarn as you sew.