Product quantity cannot be greater than 99
Available in Stores
PART # 820249096
3mm Rolled Hem Foot for IDT™ System
Specialty type: Mending & Alterations
Purchase This Item Through Your Favorite PFAFF® Store
Easily create a quick rolled hem for light to medium weight fabric
Quickly sew a 3 mm hem for a clean, durable edge.
At A Glance
- Hem light to medium weight fabrics
- No need to pre-iron fabric edges
- Great time-saver for sewing clothing, home decor projects and more
Machine Compatibility
(tap letter to learn more)
-
B
Machines with 5,5 mm stitch width, without IDT™ system
- hobby™ 1042, 1040, 1032, 1030, 1022, 1020, 1016
-
C
Machines with 5,5 mm stitch width, without IDT™ system
- expression™ 2014
- tiptronic™ 6112, 6110, 2020, 2010
- select™ 2.2, 2.0, 1528, 1526, 1520
- hobby™ 4260, 4250, 4240
-
D
Machines with 5,5 mm and 6 mm stitch width, and IDT™ system
- select™ 4.2, 4.0, 3.2, 3.0
- select™ 1548, 1546, 1540, 1538, 1536, 1530
- tiptronic™ 6270, 6250, 6232, 6230, 6152, 6150, 6122, 6120
- stretch & jeans™ 6091
- freestyle™ 1527, 1522
-
E
Machines with 6 mm stitch width, and IDT™ system
- creative™ 2124
- quilt expression™ 2046, 2044, 2042
- expression™ 2036, 2034, 2028, 2026, 2024
- classicstyle™ 2029, 2027, 2025, 2023
- tiptronic™ 2040, 2030, 2020, 2010
-
F
Machines with 9mm stitch width, without IDT™ System
- creative™ 7560
-
G
Machines with 9 mm stitch width, and IDT™ system
- creative™ 2170, 2144, 2140, 2134
- creative™ 7570, 7562, 7550, 7530
- performance™ 2058, 2056, 2054
- quilt expression™ 2048
- expression™ 2038
-
J
Machines with 9 mm stitch width, and IDT™ system
- creative sensation™ pro II, pro
- creative sensation™
- creative vision™
- creative performance™
- creative™ 4.5, 4.0, 3.0, 2.0
- performance™ 5.0, 5.2
- quilt expression™ 4.2, 4.0, 720
- expression™ 3.5, 3.2, 3.0, 2.0, 150, 710
-
K
Machines with 7 mm stitch width, and IDT™ system
Machines with 6 mm stitch width- creative™ 1.5
- quilt ambition™ 2.0, 630
- ambition™ 1.0, 1.5, 610, 620
- ambition essential™
- passport™ 2.0, 3.0
- SMARTER BY PFAFF™ 260c, 160s, 140s
-
L
Machines with 9 mm stitch width, and IDT™ system
- creative icon™ 2, creative icon™
- performance icon™
for IDT™ system
1. Select a straight stitch, snap on the Rolled Hem Foot and engage the IDT™ system (if applicable on your machine). If needed, press only the beginning of the hem to 4 mm wide. Place it flat in the groove under the foot and sew a few stitches. Lower the needle into the fabric to hold it in place. Raise the presser foot and pull the cut edge of the fabric into the scroll of the hemmer. Lower the foot and continue sewing while holding the cut edge up in front of the foot.
2. Do not allow fabric to run under the right half of the presser foot.
TIP: Hem crisp fabrics with a straight stitch. Hem soft fabrics with a zigzag stitch that just encases the width of the hem. (Sharply curved areas are not suitable for this type of hemmer.)
